When there’s no water coming out of your tap, your entire daily routine suffers. You can’t cook, clean, or even wash your hands after using the bathroom.
In this blog post, you’ll discover the reasons why there’s no water coming out of your tap, what to do about it, and when it’s time to call in professional help.
If you need further assistance after reading this guide, contact Quality Heating, Cooling, Plumbing & Electric for the best plumbing repair in Mounds, OK.
Check the Other Water Sources Around Your Mounds, OK, Home
If you notice that there’s no water coming out of one of your taps, check the other faucets around your home. Turn on every sink, shower, and outdoor spigot. If one fixture has low water pressure, focus the repair on that tap. If none of them work, target the main supply line.
Inspect the Shut-Off Valve
If you discover that only one faucet has low water pressure, there’s a good chance the shut-off valve under the sink is the problem. Someone may have closed it during a repair and forgotten to turn it back on. If that sounds likely, look under the sink and find the small valve on the pipe.
Turn it counterclockwise until it stops to restore the flow.
Test Both Hot and Cold Settings
Not all water issues affect both hot and cold lines. To figure out which one has failed, turn on the hot and cold handles separately. If the hot side doesn’t work, your water heater is the culprit. If the cold side has an issue, you likely have a blockage or frozen section in the cold supply line.
Unscrew the Aerator and Check for a Clog
The aerator is a small screen at the tip of your faucet that controls how water flows by mixing air into the stream. It also catches grit and debris from your water supply, preventing clogged taps.
If you notice that there’s no water coming out of one of your taps and you live in an area with excessively hard water, know that minerals will clog the screen over time.
If you suspect a clog, remove the aerator to check for buildup. Twist it off by hand or with pliers if it feels stuck. Check the holes for white buildup or grit. Soak the screen in vinegar to dissolve the blockage, then screw it back on and test the water flow.
Check the Main Water Shut-Off Valve
If you have dry taps in every area of your Mounds, OK, home, check the main shut-off valve. You’ll usually find it near the water meter or next to the water heater. Turn the valve counterclockwise to open it if needed.
Ask Your Mounds, OK, Neighbors Whether They’ve Lost Water, Too
If your whole house lost water at once, you’re probably not the only one. Walk next door or send a quick text to see whether your neighbors still have water. If their taps have also stopped, the problem likely stems from a larger municipal issue.
Call Your Utility Company
If your neighbors in Mounds, OK, have also lost water, call your utility company immediately. Ask whether they shut off service for repairs or maintenance. If they confirm an issue, you’ll know it’s not a plumbing emergency in your home.
Inspect Exposed Pipes for Ice, Leaks, or Dents
If water stops flowing during cold weather in Mounds, OK, check your pipes for signs of freezing. Look in crawl spaces, under sinks, and along outside walls. Feel for frost, bulges, or cold spots, all of which point to a frozen blockage.
After a freeze, a sudden thaw may trap air in the line and create an airlock in pipes that stops water until you release the pressure.
Check for Sediment Buildup
If your water slowed down before it stopped, sediment likely built up in your pipes and created a plumbing blockage. If you use a well, check the pump’s power supply and pressure switch. Both issues need a plumber to fix, whether to clear the line or repair the pump.
The Fastest Way To Restore Water Pressure in Mounds, OK
If you’ve discovered that there’s no water coming out of your tap, home plumbing upgrades are a great way to ensure steady water pressure for years to come.
If you’ve gone through the steps in this blog and still don’t have water, contact Quality Heating, Cooling, Plumbing & Electric for the best plumbing repair in Mounds, OK.
