You know it’s important to maintain your indoor plumbing, but don’t forget about your outdoor waterworks. Because items such as hoses, sprinklers, and outdoor pipes are constantly exposed to the elements, they’re prone to failures that require expensive plumbing repair services in Broken Arrow, OK. With good maintenance, though, you can keep your outdoor plumbing in great shape.

Below, learn our best outdoor plumbing tips. Having outdoor plumbing problems? Call us for plumbing repair in Bixby, OK.

Outdoor Plumbing Tips for Bixby Homeowners

Outdoor plumbing maintenance isn’t a once-a-year thing. As the seasons shift, so do the potential problems that can crop up in your plumbing system. To prevent them, you’ll need to pay attention to your system all year long. Check out our seasonal plumbing tips so you’ll know what to focus on.

Clean Your Gutters and Downspouts

While gutters aren’t exactly part of your plumbing system, failing to keep them clean can cause serious water damage, not to mention issues with your roof. Gutters and downspouts are prone to clogs from debris, including leaves, soil, branches, and insect nests.

At least once a year (twice is better), give your gutters and downspouts a good cleaning. You can use the water pressure from a garden hose to push stubborn debris through and out of your gutters. Want more outdoor plumbing tips for caring for your gutters? Call us today.

Clear Debris From Outdoor Drains

Your outdoor drains are responsible for carrying rainwater away from your home. Should those drains get clogged with leaves and mud, the water has nowhere to go. You could end up with a flooded yard or even torrents of water rushing into your home.

Thankfully, it’s easy to prevent this by regularly cleaning your drains. Brush away any leaves covering the drains, and use a hose to rinse mud off the drain covers. If you see water backing up from the drains, call a plumber. They can use a technique called hydro jetting to remove clogs deep inside your drains.

Maintain Your Irrigation System

Without your irrigation system, you’d have to spend hours each week watering your lawn and flower beds. If you want your irrigation system to last, follow these outdoor plumbing tips.

• Before use, check your sprinkler heads and hoses for clogs and leaks. If the soil is very damp in a particular area or you notice puddles of standing water, your system might have a leak.
• Test the water pressure going to your irrigation system — it should be between 20 and 40 psi. Overly high water pressure can strain and damage the system. If yours is too high, consider installing a pressure regulator.
• Before winter, drain any remaining water in the system and disconnect the hoses. This prevents water from freezing and damaging the system.

Inspect Water Supply Lines for Leaks

Are your water bills sky-high? You may have a leak somewhere in your water supply line. Outdoor plumbing lines are prone to leaks due to our frosty winters and scorching summers.

To spot leaks, look for signs of rust and corrosion around the joints where fixtures and faucets connect. You can temporarily fix leaks with plumbing tape, but it’s best to call an expert for a more permanent solution.

Protect Outdoor Pipes From Frigid Weather

Winter temperatures can drop below freezing here in Bixby, so protecting your outdoor pipes from the cold is a must. If you fail to do so, your pipes could crack or burst, leaving you with a big mess to clean up.

To protect your pipes, wrap them in insulation rated for outdoor use. If an arctic cold front is incoming and you don’t have time to buy insulation, a thick blanket works well in a pinch.

Keep your faucets dripping a bit when freezing weather is in the forecast to help prevent water from freezing in the pipes.

Schedule Regular Plumbing and Outdoor Pipe Maintenance

Although there are many outdoor plumbing tasks you can handle yourself, it’s always best to have a plumbing repair expert in Bixby handle maintenance for you. During an outdoor plumbing inspection, a plumber will inspect your system for cracks, leaks, and other problems. If they find any issues, they’ll offer solutions for repairs.

At Quality Heating, Cooling, Plumbing & Electric, we recommend scheduling annual outdoor plumbing maintenance.

Call Our Pros in Bixby, OK, for More Outdoor Plumbing Tips

Need more outdoor plumbing tips? Call the pros at Quality Heating, Cooling, Plumbing & Electric! Our experienced plumbers in Bixby offer outdoor plumbing maintenance and repairs at competitive prices.

Call today to discover outdoor plumbing solutions or learn about our most popular home plumbing upgrades.

Have you ever asked, “What is a sump pump used for?” A sump pump’s main job is water removal, which can play a crucial role in flood prevention and waterproofing your home. Call our experienced plumbers in Collinsville, OK, to decide whether you need a sump pump and how to choose the right model.

How Does a Sump Pump Work?

A sump pump sits in a sump pit at your home’s lowest point, like a basement. It spends most of its time in standby mode. During heavy rain or floods, water saturates the soil and flows into the sump pit. As the sump pit begins to fill, the float switch turns on, and the sump pump starts working. It redirects water from the sump pit into a nearby drain or dry well. 

Most sump pumps are submersible, i.e., located below the waterline. They are quieter, more efficient, and usually pricier than pedestal pumps. However, a pedestal sump pump could be a good solution if your sump pit isn’t deep enough to contain a submersible pump. Pedestal pumps have the advantage of easier access and more convenient maintenance. 

With proper upkeep and regular inspections, a sump pump may withstand up to a decade of use. It’s a comparatively small investment with big benefits like more efficient rainwater drainage, foundation protection, and better indoor moisture control.

Do You Need a Sump Pump in Collinsville, OK?

When you look up “What is a sump pump used for?” Your main goal is probably to figure out whether your home needs one.

A sump pump can divert moisture from your basement, protect appliances from corrosion, and reduce mold and mildew. So, should you install this common device? The following checklist may help you decide. 

Do You Have a Basement?

Many homes in Collinsville, OK, don’t have basements. Local homeowners often forego a basement due to heavy clay soil, high construction costs, and mild winters.

If you do have a basement, though, especially a finished one, you should probably install a sump pump. Once you convert your basement into a cozy living space, you don’t want to risk any moisture damage. A sump pump will help keep water out of your basement and prevent mildew, mold, peeling paint, and other moisture-related issues. 

Does Your Home Have a High Flood Risk?

The main answer to “What is a sump pump used for?” is “To keep flooding at bay.” Thus, if your property is likely to see floods, you probably need a sump pump.

In general, Collinsville, OK, is not at a high risk of flooding. However, this may be different for low-lying plots with poorly draining soil. If your property answers this description, you’re in danger of flooding from rising groundwater during rainstorms and melting snow. 

If your home is at high flood risk, you may even want to install a backup sump pump that would kick into action in case the first sump pump fails.

Do You Notice Moisture or Water in Your Basement?

If you’ve already had to deal with a flooded basement, you obviously need a sump pump (or replace your old one). However, you should also consider installing a sump pump if you notice moisture, mold, warped flooring, or musty odors in your below-ground space. A sump pump will help keep your basement dry and protect your belongings. 

Other Ways To Protect Your Home Against Water Damage

While a sump pump helps move water away from your basement, you also need to keep moisture away in the first place.

Waterproofing

Waterproof sealants, coatings, and vapor barriers can improve your basement’s moisture resistance. You should also have your basement inspected for any cracks and seal them. 

Plot Grading

You’ll prevent many water-related problems by grading your plot so that the ground slopes away, rather than toward your home. Channels could also help divert water away from your home.

Gutters and Downspouts

Keep your gutters clean to ensure rainwater can flow freely. Downspouts should direct water no less than five feet away from your home’s foundation.

Quality Heating, Cooling, Plumbing & Electric: Sump Pump Installation & Maintenance in Collinsville, OK, and Surrounding Areas

Are you wondering, “What is a sump pump used for?” Call us at Quality Heating, Cooling, Plumbing & Electric. Our pro team will help you understand whether you need a sump pump and how it can reduce plumbing hazards in the basement of your home in Collinsville, OK.

Most homeowners have to deal with the occasional plumbing issue. Quality Heating, Cooling, Plumbing & Electric, the top plumbers in Jenks, OK, handle calls from frantic customers dealing with leaks, clogs, and backups every day, fixing the issue and restoring reliable water service. 

Sometimes, though, frequent or ongoing home plumbing issues need much more than a quick fix. If it feels like you spend as much time with your local plumber as you do with your family, it’s time for some plumbing upgrades to save hassles, money, and your home from damage. 

Is It Time To Replace Your Jenks Home Plumbing System? 

Repiping, or plumbing pipe replacement, is a big project. However, it’s worth the time and expense when you consider the importance of a reliable and safe water system. Instead of waiting for a disaster to force you into plumbing upgrades for your Jenks home, watch for these hints that it’s time to be proactive.

1. Old Pipes 

Do you know the age of the plumbing pipes running through your walls? Have you lived in Jenks for decades and never replaced them? If so, it might be past time to invest in some plumbing upgrades. 

Brass, steel, copper, or galvanized metal pipes can last between 80 to 100 years, so you might not need immediate replacement if your home isn’t that old. However, PVC pipes typically have a lifespan of 25 to 50 years, so even if your house isn’t necessarily “old,” the plumbing might be. 

The one type of pipe that you need to upgrade immediately, regardless of age, is lead. It’s unlikely that your home has these pipes, and the city of Jenks has taken precautions to reduce exposure to this toxic metal, but if you have concerns, have a plumber inspect your system.

2. Visible Pipe Damage or Corrosion

Identifying problems within your plumbing that indicate it’s time for pipe replacement can be tricky since much of the system is hidden under the slab and behind walls. However, the exposed pipes can provide some obvious clues to the condition of the rest of the system. Check the visible pipes for signs of corrosion and deterioration like stains, rust, and bumps or divots. If the plumbing you can see has problems, you can only imagine what’s going on in less accessible spots. 

3. Frequent Clogs and Leaks 

The occasional clog or leak is normal, and most Jenks homeowners have to deal with these issues at some point. However, if it seems like nothing can clear a stubborn clog or you have multiple leaks, there’s a bigger problem lurking in the pipes. Pipe corrosion can occur due to age and wear and tear, but there could also be mineral buildup, damage, or a stubborn blockage wreaking havoc. 

4. Poor Water Quality 

Jenks purchases its water from the city of Tulsa, and it goes through a water treatment facility before reaching your home. Although it meets the state and federal standards for water quality, your plumbing system can release contaminants that affect its color, taste, and smell, indicating the need for plumbing upgrades. 

If the water coming from your taps is brown or rust-colored, there’s cause for concern. This usually signals pipe corrosion, and the color comes from the rust particles that get into the water as it flows past. Eventually, rust accumulation can narrow the pipe, affecting water pressure and even causing it to burst. 

An unusual smell or taste from your water supply can also spell trouble. The most common issue is sulfur, which smells like rotten eggs. You might need a filtration system to handle bacteria and gases in the water, which, while not harmful to your health, are unpleasant.

6. Inconsistent Water Pressure 

If the water coming from your shower and taps is barely more than a trickle, something’s wrong with the plumbing and needs attention. The problem can be anything from a hidden leak or clog to mineral or debris accumulation inside the pipes. Ultimately, water pressure issues can cause the pipes to burst, resulting in extensive water damage, so it’s best to address the problem as soon as you notice it. 

Talk to Jenks’ Trusted Plumbing Professionals About a Home Plumbing Overhaul

Since its founding in 1905, the town of Jenks has undergone many changes, but many of the homes date back many decades. Quality Heating, Cooling, Plumbing & Electric specializes in old home plumbing problems, and if it’s time for plumbing upgrades to address issues related to outdated pipes, we’re here to help. Request a plumbing inspection and evaluation of your system, and take care of the pipes before they cause problems.

Imagine you’re washing the dishes and seeing food particles and cloudy water pooling instead of flowing down the drain. It’s a disgusting sight, especially if you have to constantly put your hand under the murky water looking for remaining dishes or feeling for the sink strainer. If you don’t want to make this an everyday occurrence (and you shouldn’t!), you may consider off-the-shelf products, but aren’t there harmful chemicals in drain cleaners?

At Quality Heating, Cooling, Plumbing & Electric, we warn residents to be wary of what they put down their drains – including harmful chemicals. The wrong mixture can leave you with more problems than solutions. Our plumbing services in Inola, OK, and surrounding areas explain more below about using the correct cleaning products and methods in water fixtures. 

Why the Need for Drain Cleaners in Inola?

The town of Inola, Oklahoma, sits within Rogers County as part of the Tulsa Metropolitan Statistical Area. That means Inola shares many factors with the latter, including water quality. 

While these areas have a water hardness rating of 140 parts per million (lower than the state average of 146), you may still consider it poor. The EPA advises those dealing with water hardness of more than 120 ppm to consider water softeners. Aside from staining clothes and dishes and reducing suds for less cleaning ability, hard water’s minerals easily cause plumbing clogs.

In your Inola supply and discharge lines, calcium and magnesium contribute to scale buildup. Harsh minerals also corrode the pipes, causing debris accumulation. Other causes of clogs include:

• Throwing non-flushable products into your toilet
• Having hair, soap scum, and dead skin cells enter your shower or bath drain
• Allowing oils, fats, grease, and other solidifying substances in your kitchen sink drain

The Right Chemical Cleaners for Your Inola Clog

Now that you know what’s in your water, what about the chemicals in drain cleaners? Clogs take on many forms and have countless origins, so it makes sense that you’d need to look at different cleaning solutions.

Acidic Cleaners for Mineral Clogs

If your Inola home doesn’t have a water softener and hard water causes constant mineral buildup, acidic cleaners are the way to go. Hydrochloric acid with sulfuric acid thoroughly breaks down hard water buildup, mineral deposits, and soap scum. While it’s one of the heftier cleaning solutions, you may need to use it multiple times to break down large clogs. 

Caustic Cleaners for Grease

Caustic cleaners mirror acidic cleaners since they both break down drain material, but the type of drain material slightly varies. Caustic solutions comprise sodium hydroxide, potash, potassium hydroxide, or aluminum shards, chemicals with a higher pH that can break down grease. The hydroxide ions in this mix cause grease to convert into a soap-like, water-soluble substance via an alkaline chemical reaction. 

Oxidizing Cleaners for Soft Drain Debris 

The chemicals in drain cleaners also vary when you move onto oxidizing cleaners because, unlike the other two, this solution will be gentler on your Inola plumbing system. It comprises sodium hypochlorite, hydrogen peroxide, and nitrates that steal electrons from the molecules of organic clogs. It may produce heat or gas while breaking down simple clogs comprising soft foods and hair. 

Why You Shouldn’t Mix the Mixes in the Drain

Sometimes, it’s difficult to tell what plagues your Inola plumbing system. If you can’t seem to figure it out, you won’t know which solution to use, and you may think your next step is trial and error. However, using the wrong solution or throwing them all into the drain could have dire consequences. 

Once you pour a chemical mixture into the drain, it rests on the pipe walls. Pouring another into the drain afterward guarantees a new set of chemicals will sit on the first layer. Unfortunately, some chemicals should not mix since they have negative reactions when combined and create compounds or gases that are dangerous for your pipes or toxic for you.

For instance, mixing an oxidizing cleaner that comprises bleach with an acidic one releases chloramines into your Inola breathing air, causing respiratory illnesses. Some chemicals also cancel each other out, like alkaline baking soda and acidic vinegar, which doesn’t help your drain at all. Check the details with a plumbing professional instead.

Locally Owned and At Your Service!

Clogs are annoying, and testing solutions can be just as frustrating. Why not skip the dangers and costs of chemicals in drain cleaners and contact our five-star Quality Heating, Cooling, Plumbing & Electric team? With regular plumbing check benefits in Inola, OK, it’s an easy choice – call us!

Hearing rattling sounds in your walls after you flush the toilet can be unsettling. What is going on in there? Why are the pipes that noisy? We receive numerous questions from residents who call us, including, “Why do the pipes rattle when I flush the toilet.” As the top choice for plumbing services in Broken Arrow, OK, they expect us to have all the answers—and we always do!

We’ll cover all the top reasons your pipes rattle after flushing the toilet in this post.

Loose Pipe Supports

Plumbers secure pipes to floors, ceilings, and walls using clamps and brackets. These supports can come loose over time due to general wear. When this happens, the affected pipes will vibrate each time you flush the toilet as water flows through them.

You can address this problem by checking for loose straps and brackets around the pipes leading to and from your toilet. If you find any, you should call in a professional plumber to properly tighten or replace them.

Trapped Air in Pipes

Air bubbles trapped inside pipes can lead to gaps in the water flow. This situation results in irregular pressure changes when water flows through the pipes. This might explain the rapid vibrations when you flush the toilet.

Thankfully, you can release trapped air in pipes without professional help. To do this, just turn off the water supply from the main, open all faucets, and flush the toilet. This should be enough to get rid of any trapped air in the system. If the problem persists after you turn the water supply back on, it’s time to call in a professional plumber for a more in-depth look.

Water Pressure Problems

If you’re wondering, “Why do the pipes rattle when I flush the toilet?” you might be experiencing water pressure issues. Pipes often rattle and shake when a sudden, high surge of water occurs. If you ignore high water pressure long enough, you may find yourself dealing with severe plumbing leaks and damage.

The solution here is to get a plumber to install water pressure regulators. These devices will ensure that only a certain amount of water pressure can flow through your pipes at any given time.

Toilet Valve Issues

The fill and flush valves in your toilet could be the reason for the rattling sounds you hear from your pipes when you flush the toilet. Faulty or worn-out valves generally do not regulate the flow of water correctly. As a result, you may experience sudden pressure changes that may lead to noise and vibrations in the pipes.

Replacing these valves can restore peace and quiet to your home again. You can replace the valves by getting replacement parts from your local hardware store. However, getting the parts is only one-half of the equation. You also have to install them properly. Not a job you can take on? Leave it to an experienced plumber instead.

Water Hammer

Many people asking, “Why do the pipes rattle when I flush the toilet?” are experiencing a phenomenon known as water hammer. This happens when the valves inside the pipes close too quickly, suddenly stopping the flow of water through the pipes. The abruptness of the water reversal leads to that persistent rattling or banging noise you hear after flushing the toilet.

If your plumber confirms that you have a water hammer problem, they might recommend installing a water hammer arrestor.

Can I Ignore the Rattling Pipes?

It might seem like a good idea to ignore the rattling pipes and endure any noise after flushing the toilet. However, it’s not a good idea. Treating the issue like some minor inconvenience could mean:

• Severe pipe damage. Excessive vibrations and rattling can loosen pipe connections and joints over time. This will increase the likelihood of experiencing leaks and bursts.
• Water wastage. Problems with valves can cause your toilets to run continuously, and the wasted water means higher utility bills.
• Serious structural damage. Excessive plumbing vibrations can damage the surrounding floors, ceilings, and walls.

Therefore, addressing the problem now can help you avoid costly repairs later.

Get Custom Plumbing Solutions From Your Local Experts in Broken Arrow, OK

Do you want a custom answer to, “Why do the pipes rattle when I flush the toilet?” Do you want to know the causes of plumbing backflow or other plumbing issues you might be experiencing? Get in touch with the highly experienced crew here at Quality Heating, Cooling, Plumbing & Electric to schedule a consultation.

Clogs and backups in the sewer line can happen at any time of the year. However, this plumbing disaster is somewhat likelier to strike during frigid weather, both because of possible pipe freezing and because tree roots may seek moisture and infiltrate pipes if the soil dries out during the cold season. 

The last thing you want is to deal with a plumbing blockage under conditions of hail, slush, or snow. The following tips will help you prevent sewer line backups in winter in Collinsville, OK.

Avoid Clogs

Blockages are one of the most common reasons for sewer line overflows. You’re a lot less likely to face clogs and blockages if you:

• Keep cooking oil and fat away from drains. Avoid pouring fat, oil, or grease down the drain. These can solidify and block your pipes. 
• Never flush anything but toilet paper. Paper towels, sanitary napkins, and even so-called “flushable” wipes won’t dissolve quickly enough in the plumbing system and may create a clog.
• Cover drains. Simple, affordable drain covers are great for catching hair, stray bottle caps, small bath toys, and other objects that could clog your pipes.

Watch Out for Invasive Roots and Pooling Water

The trees in your yard are an often-overlooked menace to plumbing. Tree roots may interfere with sewer lines and infiltrate pipes. As a rule, you need a minimum distance of 10 feet between trees or shrubs and underground pipelines. If you’re moving your sewer line, keep it well away from existing trees.

Some trees are notorious for their invasive root systems. Willows, poplars, silver maples, and American elms are a few tree species you should plant as far as possible from any underground pipes to prevent sewer line backups. 

You can use chemical inhibitors to kill aggressive roots and prevent new roots from growing. However, root inhibitors will only solve the problem for a few years. If you decide to cut down a tree with invasive roots, you’ll also need to remove the stump to eradicate the root system. 

Flooding or pooling water on your lot could also be a problem since excess water may seep into sewer lines and compromise their integrity. Talk to a professional landscaper about solutions to divert pooling water from your yard.

Protect Your Sewer Line From Freezing 

Although Collinsville doesn’t often see extremely harsh winter weather, freezes can still happen in December through February when Arctic air moves in from the north. Exterior pipes are often more susceptible to freezing than indoor pipes.

Adding insulation to your pipes can help prevent sewer line backups. Heat tape, foam pipe insulation, or an additional soil cover are all good options for outdoor piping. You should also seal any gaps where your indoor pipes join the sewer line. 

When temperatures drop below freezing, keep a thin trickle of water flowing through your pipes. Run sinks and flush toilets regularly so water keeps moving. Use hot water taps as often as possible.

Pay Attention to Warning Signs 

You may notice signs of an impending sewer line backup before it happens. If your drainage suddenly becomes slow throughout the house rather than in just one drain or area, something is likely blocking your main sewer line. 

Also, pay attention to unusual bubbling or gurgling noises in your pipes or drains. Strange sounds may point to an obstruction in the sewer system. If in doubt, call your local trusted plumbers in Collinsville, OK, to schedule an emergency sewer line inspection and cleaning. It’s always better to be safe than sorry.

Invest in Plumbing Maintenance in Collinsville, OK

Many homeowners don’t think about their plumbing while the water still flows. However, an annual plumbing inspection can save you a lot of trouble and money in the long run. A basic checkup can uncover problems like hidden leaks, loose pipe joints, invasive tree roots, and corroded pipes before they turn into a major plumbing crisis. 

Spring or fall are the best seasons for a plumbing inspection in Collinsville, OK. A fall checkup will help ensure your plumbing and sewer lines are ready for the winter, while a spring inspection can assess any winter damage.  

Facing a Plumbing Emergency in Collinsville, OK? Call Us Now

Even if you take every step to prevent sewer line backups during the winter, plumbing emergencies may still happen. We at Quality Heating, Cooling, Plumbing & Electric provide fast 24/7 plumbing service in Collinsville and other locations near Tulsa, OK. We also offer regular plumbing checks for saving money and ensuring your pipes stay in good shape. 

A burst pipe can turn into a full-blown disaster scenario. If you notice a puddle near a plumbing fixture, unexplained moisture on your walls or ceiling, or strange noises from your piping, act quickly. Taking the right steps when a water pipe bursts can prevent flooding and significant damage to your home. 

Why Do Pipes Burst in Catoosa, OK?

Freezing is probably the most common reason for burst pipes. Although Catoosa, OK, doesn’t often experience extreme cold, sudden freezes may happen, especially when a strong cold front moves in from the north. Poorly insulated pipes located near exterior walls are in a more significant danger of freezing. 

Corrosion in old, worn-out pipes, severe clogs, and tree roots that grow into your plumbing may likewise cause a burst pipe.

An annual plumbing inspection may help prevent many burst pipe emergencies. Your plumbing expert can spot and address minor leaks before a water pipe bursts. They may also suggest reinforcing or replacing old plumbing. 

What Should You Do When a Water Pipe Bursts?

Don’t panic! Follow this checklist to control the situation and minimize damage if a water pipe cracks or bursts.

1. Shut Off the Water Flow

Start by shutting off the water flow at the main valve. You can usually find this valve near your water meter or where the main line connects to your home. 

Open any faucets to drain the pipes of remaining water. Flush the toilets. If you notice moisture near any electric fixtures, you may also need to shut down the power to prevent an electric hazard. 

2. Call a Reliable Local Plumber

Please don’t try any DIY repairs if a water pipe bursts. A burst pipe is an emergency, so call your trusted plumbers in Catoosa, OK, ASAP. Make sure you work with a plumbing professional who knows how to handle burst pipes safely. 

Your plumbing pro will locate the burst pipe and suggest the most cost-effective way to fix it. They’ll likely need to remove the damaged section and replace it with new piping. If the plumber discovers more sections of deteriorated plumbing, they may propose replacing those as well. Installing epoxy liners is another option for sealing old pipes. 

Once the plumber finishes their work, they’ll test the repaired pipes by turning the water flow back on and checking for any leaks. 

3. Clean Up

Water can seriously damage your home’s structure, floors, rugs, furniture, and appliances. Shift any movable items to a dry area and start cleaning up the water. Use a wet/dry vacuum to get rid of standing water. Thorough ventilation and a dehumidifier or fans will help reduce excess moisture. 

If you’re dealing with severe water damage after a water pipe bursts, consider hiring emergency cleaning services. Flood cleanup professionals have high-grade tools and the right experience for drying and restoring homes. 

4. Assess the Damage

Make a full list of any damaged property and, if it’s relevant, contact professionals for repair cost estimates. Take photos and videos of the damage for insurance coverage. Save receipts for any expenses you cover out of pocket. Contact your homeowners insurance provider and find out what your policy covers. 

Preventing Burst Pipes 

Since water pipes often burst because they freeze, pay extra attention to your plumbing system when temperatures drop to 20°F or lower. Disconnect garden hoses and shut off the water flow to outdoor faucets as part of your winter prep routine. Drain your sprinkler system before the first freeze.

Leave faucets slightly open during a freeze so that water keeps flowing. Set your thermostat to a minimum of 55°F, even when you aren’t home. Consider adding insulation to pipes in cold areas, especially those along exterior walls and in attics or basements. Check your windows and doors for any air leaks that could expose your pipes to cold drafts. 

Do you have any trees that could cause plumbing problems, like willows, magnolias, and poplars? Consider removing trees that grow too close to plumbing lines or use a root inhibitor to prevent invasive roots.

Finally, be proactive about replacing old, degraded pipes. Pay attention to warning signs like discolored water, low water pressure, or visible corrosion, and upgrade your plumbing before it wears out.

Call Us for Quick Emergency Plumbing Repairs in Catoosa, OK

If you suspect that a water pipe burst, get in touch with us. At Quality Heating, Cooling, Plumbing & Electric, we provide efficient 24/7 plumbing service at transparent prices. We also offer regular plumbing checks for saving money and preventing emergencies. Schedule a service call now. 

Does your water suddenly run cold while you’re showering? Have you noticed strange sounds from your water heater? You may face a tough choice: do you repair your old heater or invest in a new one?

The answer to “Do I repair or replace my water heater?” will depend on factors like your current heater’s age, condition, and energy efficiency. Sometimes, a quick repair can resolve the problem for a long time. In other cases, installing a new heater may be a better choice. 

How Much Would It Cost To Repair the Issue?

If you aren’t a professional, it’s hard to tell how much water heater repair in Broken Arrow and Bristow OK may cost. Call our water heater services in Bristow, OK, for a detailed repair vs. replacement estimate, complete with several installation options. 

Some water heater problems are fairly easy and inexpensive to fix. For example, if your water heater malfunctions because of a faulty drain valve or thermostat, replacing the damaged part will often resolve the issue, and you can continue enjoying a steady hot water supply. 

If you haven’t invested in regular water heater maintenance over the years, it’s also possible that your heater is failing because of a massive sediment buildup. Like much of Oklahoma, the area of Bristow has hard water that can wreak havoc on water heaters. In this case, a professional flushing can restore your unit’s efficiency. 

How Old Is Your Water Heater?

Most water heaters have an average life expectancy of 8 to 12 years, depending on the unit model, maintenance, and wear and tear.

Regular maintenance, including an annual inspection and flushing to prevent sediment buildup and corrosion, can extend a water heater’s life. Nevertheless, if your water heat is around a decade old, it’s likely nearing the end of its lifespan, and you’ll probably need to replace it. 

Does Your Water Heater Often Give You Problems?

When you wonder, “Should I repair or replace the water heater?” consider your heater’s overall performance. If you have already invested in several water heater repairs but the unit keeps breaking down, a new installation will likely be more cost-efficient.

When you add service costs up, you may realize you’re pouring money down the drain and still put up with an unreliable heater. And that’s without mentioning the extra fee of emergency services if your water heater stops working late at night or on a weekend.

What Are Your Energy Costs in Bristow, OK?

The coldest months in Bristow, OK, are December and January, with the average low temperature hovering around 25°F. That’s also when your water heater works hardest because the water entering the heater is colder and takes more energy to heat.

Newer water heaters, especially tankless heaters, are much more energy-efficient than older models. A tankless heater will supply a constant stream of hot water without the standby energy loss of a conventional water heater. Upgrading your water heater could lower your energy costs and partially offset the cost of a new installation. 

Does Your Water Heater Show Signs of Extensive Wear?

If your water heater shows advanced wear, it may be time to replace it. To decide whether to repair or replace a water heater, watch for symptoms like visible corrosion, leaks from the water heater, rusty water, or rumbling noises. 

Don’t ignore these warning signs! Your water heater tank may break down when you least expect it. In an extreme scenario, the tank may develop a serious leak, and your flooring or home’s foundations may suffer. Be proactive and get the problem resolved before you need to pay for an emergency service call. 

What Is Your Budget?

We get it: replacing your water heater is a major upfront expense, and a new installation may simply be out of your budget right now. You may choose to repair your old heater while you save up for a new, better-quality model.

You could also check out our flexible financing options. Eligible customers enjoy a convenient, no-hassle payment plan with several repayment term options and easy management. And the best part is that you only start paying after three months. 

Call Us for Professional Water Heater Repair and Installation in Bristow, OK

At Quality Heating, Cooling & Plumbing, we provide highly rated HVAC and plumbing services in Bristow, OK. From water heater installation, repair, and maintenance to installing a new furnace, we cover all your heating, cooling, and plumbing needs.  

Are you wondering, “Should I repair or replace my water heater?” Call us today and let our professional team propose a convenient, cost-effective solution.