Skip to main content

Rated: 4.9 / 5 based on 2100+ reviews. Read our reviews

Deal Of The Day! Up to $2,500 Off A New System Get a free quote

Author: Cassie Pound

9 Signs of Bad Plumbing You Shouldn’t Ignore: Tips for Broken Arrow Residents

It’s hard to escape plumbing issues as a property owner. They will always occur from time to time. Many homeowners have adopted the approach of ignoring the problem for as long as possible. 

However, that approach almost always leads to costlier repairs. You may also end up putting your family’s health at risk. 

Quality Heating, Cooling & Plumbing, the leading name for premium plumbing services in Broken Arrow, OK, covers the top signs of bad plumbing you should never ignore. Some of them include the following:

1. Dripping or Running Toilets

A toilet that constantly runs or drips isn’t just a minor inconvenience. It signifies a potential issue with the toilet’s internal components, especially the flapper or fill valve. Ignoring the problem means more wasted water. In a few months, you’d have lost what it cost to fix the problem to a slightly higher water bill.

2. Slow-Draining Sinks and Tubs

Slow-draining sinks and tubs in your kitchen and bathroom are not normal. It usually points to a clog. If you’ve noticed the problem in one sink or tub, then it’s a localized problem. If it affects many fixtures simultaneously, you clearly have a deeper clog in the main drain line.

3. Foul Odors

Foul odors coming up from your drains indicate a clear sign of bad plumbing. If you constantly smell sewage odors around your drains, you have a clog within your plumbing system. You need to call an experienced plumber in Broken Arrow, OK, to evaluate the issue.

4. Rusty or Discolored Water

Rusty or discolored water often points to corrosion in your pipework. It’s common in older homes with galvanized steel pipes. This sign of bad plumbing is one of those you can’t ignore because it will only worsen over time, making safe use of your water more difficult.

5. Water Pressure Fluctuations

Have you noticed a significant decline in the force of the water flowing through your plumbing system? It can be frustrating waiting minutes to fill a bucket when it used to take a few seconds.

Uneven or weak water pressure around your house often indicates a leak, clogged/undersized pipework, or an issue with the pressure regulator valve. An experienced plumber will complete the troubleshooting and recommend the most cost-effective solution.

6. Bubbling or Gurgling Sounds

Do you hear strange noises while using plumbing fixtures? These sounds occur when trapped air tries to force through the water in your pipes. It’s often a clear sign of clogs or, worse, a sewer line backup.

Professionals will need to inspect your system to identify the cause and potential solutions.

7. Visible Leaks

Can you see leaks anywhere around your home? This sign of bad plumbing is one you shouldn’t ignore. Leaks waste water. Depending on where they occur, they can cause significant damage to your home’s foundation, flooring, joists, and more. Therefore, it’s better to address them as quickly as possible.

8. Water Stains on Ceilings and Walls

Water stains on your walls and ceilings are one of the signs of bad plumbing you should never ignore. It often points to hidden leaks behind the walls or slabs. 

Ignoring such leaks can prove dangerous because it usually leads to expensive water damage and a host of structural issues. Your indoor air quality will also suffer as mold and mildew thrive in such damp conditions.

If you find water stains on your ceilings and walls, hire a plumber to evaluate the problem and carry out all necessary fixes. 

9. Inexplicable Rise in Your Water Bills

Have you noticed a sudden rise in your water bills over the last few months without any major changes to your water usage habits? This often points to hidden plumbing leaks.

You can confirm this diagnosis by listening for the sound of running water with all your faucets and appliances shut off. If you can hear the sound of water running when no one has opened a faucet, you probably have a leak. 

An even better way to confirm the leak in your water line involves shutting off the water for an hour and then checking your water meter to see if the readings reflect water usage within your home.

Get Expert Help With Your Plumbing Problems in Broken Arrow, OK

Have you noticed any of the signs of bad plumbing above? Compromising on them is a costly mistake you should avoid.

Call the Quality Heating, Cooling & Plumbing team in Broken Arrow, OK, today at (918) 393-4577 for an accurate diagnosis and a permanent fix.

Further Reading: Top tips for preventing heating problems.

Why Is My Toilet Bubbling When the Shower Is Running? What Broken Arrow, OK, Residents Must Know

Do you hear ominous noises from your porcelain throne while taking your shower? It doesn’t just ruin the serene ambiance of your routine; it might also signal the prelude to a plumbing catastrophe waiting to dunk your day into chaos. 

As a trusted provider of top plumbing in Broken Arrow, OK, we at Quality Heating, Cooling, Plumbing & Electric have helped many households address this unusual issue. Keep reading as we discuss the most common culprits.

Blocked Vent Pipe

Vent pipes play a crucial role in your plumbing system. They allow air to enter, which helps maintain the optimal pressure for a smooth and continuous water flow. Unfortunately, the openings can become obstructed by debris like leaves, nests, or even snow. 

The side effect? Whenever you take a shower and the water runs down the drain, it creates a negative net pressure in the system. It will try to equalize the pressure by pulling air from wherever it can get it, which sometimes means your toilet.

The Fix:

Since most vent pipes sit high up on the roof, you should probably leave the cleanup to a professional. Climbing up your Broken Arrow home can prove tricky and downright dangerous without the right skills or equipment. 

If you have safe and easy access, clear any visible debris and give the opening a good once-over for possible cracks or damage.

Sewer Line Trouble

Why is my toilet bubbling when the shower is running? While rare, the source of your unpleasant bathroom symphony might come from deep within the sewer line. A blockage in the system, whether from tree roots, compromised pipework, or debris, can make your toilet bubble.

It’s difficult to confirm this problem without specialized equipment. Keep an eye out for symptoms like water pooling around floor drains, multiple fixture issues, and sewage backups.

The Fix:

Book a professional assessment immediately. The longer you wait to address a compromised sewage system, the more complicated and expensive the fix can become. 

A certified plumber can use long, flexible cameras to pinpoint the blockage or damage. From there, they’ll offer the most effective solution, which might include hydrojetting to clear the obstruction or trenchless sewer repair. 

Drain Pipe Clog

Why is my toilet bubbling when the shower is running? You might have a clogged drain pipe. 

Over time, hair, soap residue, and other gunk can create obstructions. The impeded flow of water causes bubbles to form in the pipework, and some can escape through your toilet’s trapway. 

An even more unpleasant scenario is when this buildup becomes so bad that it creates smelly backups. The last thing you want is your bathroom smelling like a sewer during your morning shower.

The Fix:

You should first locate which drain or fixture has the clog. Look for common indicators like sluggish drainage or off odors near the opening. Once identified, you’ll need a damp rag, a plunger, and a screwdriver if the drain in question has a cover.

Follow these steps:

  • Remove the screen with the correct screwdriver.
  • Position your plunger over the opening.
  • If it’s a bathtub, hold a damp rag on the overflow drain.
  • Plunge vigorously 10 to 15 times on the floor drain.
  • Pour hot water down the drain. 

If the clog persists, repeat several times before calling a Broken Arrow plumber. They will utilize drum augers to break down tougher blockages beyond the reach of your average household tools. 

Shower and Toilet Maintenance Tips in Broken Arrow, OK

Take a proactive approach to your Broken Arrow home’s plumbing health. Easy but impactful steps you can take include:

  • Install drain guards: Putting screens over your sinks, showers, and bathtubs can prevent blockages down the line. 
  • Flush responsibly: Your toilet drain should only deal with human waste and toilet paper—other items like cotton balls, wipes, and sanitary products might clog it.
  • Refresh your drains: Every so often, pour some gentle cleaner or a mixture of vinegar, baking soda, and hot water into your drains. This can help keep them flowing freely.
  • Trim overhanging branches: Do you see branches looming over your roof? Prune them before the debris clogs your vent pipes.

Your Go-To Toilet and Shower Specialists in Broken Arrow, OK

Why is my toilet bubbling when the shower is running? Instead of troubleshooting alone and getting your whole bathroom in a mess, why not call Quality Heating, Cooling, Plumbing & Electric? Our crew is available 24/7 for your convenience and peace of mind.

Dial 918-393-4577 or read more of our blog and learn about common heating problems and the best way to avoid them. 

Do You Need to Replace Ductwork When Replacing the AC in Your Home in Owasso, OK?

Do you need to replace ductwork when replacing an AC? If you plan to upgrade your indoor cooling soon, this question might have crossed your mind more than once. 

As a leading provider of Owasso AC repair services, we at Quality Heating, Cooling, Plumbing & Electric know the intricate details like no one else. Keep reading as we lend some insight and help you navigate the decision-making process. 

What’s Ductwork Exactly?

Air ducts resemble a network of tunnels typically made of metal or fiberglass. Most of them snake through the hidden parts of your home’s walls, floors, and ceilings, while some lie exposed to add some industrial charm to modern interiors. 

What is their job? Deliver cool air from your AC to every part of your home so that everyone can enjoy a refreshing breeze on those sweltering Owasso summer days. 

Updating Your Ductwork in Owasso, OK

The good news is that you don’t always have to add air duct replacement to your to-do list when changing your AC. You can simply take out the old unit and slot in the new one.

Some cases might demand it, though. Account for various factors such as:


Like a trusty pair of jeans, air ducts might serve you a long time but not forever. They typically have a lifespan of about 10 to 15 years. 

Are you holding onto an obsolete system? You might notice your energy bills creeping up as your AC works overtime to push air through leaks or blockages. The air quality in your home could also take a nosedive and make your space less comfortable.


Newer models might operate more efficiently, but they also come with different sizing requirements. If there’s a mismatch, your shiny new AC unit might not perform optimally, or worse, it could fail to work entirely. 

Let an HVAC system specialist conduct a thorough assessment. They’ll measure the airflow and see if your current setup can handle the new system’s requirements.


Do you need to replace ductwork when replacing the AC? If the upgrade is to accommodate a remodel or addition to your Owasso home, the answer is likely yes. 

You need an even balance of airflow and distribution for efficient cooling, and your current ducting might fail to cover the new spaces adequately.

When to Get New Air Ducts in Owasso

You don’t have to wonder if it’s time to replace your air ducts. Keep an eye out for these red flags:

Rising Usage Costs

Think of damaged ductwork as leaving a tap running—it drains more than just water; it’s your hard-earned money flowing right out. Leaks force your indoor cooling to work harder and spike your energy usage. 

Make it a habit to compare your latest bills with those from the same period last year. Do you see a steep climb? You might have compromised ducts.

Strange Noises

Do you hear whistling, rattling, or banging behind your walls or ceilings? They often point to loose parts, holes, or blockages within your system. Some of these sounds are fairly faint, so pay close attention when your house is quiet, especially at night. 

Poor Indoor Air Quality

Old or damaged ducts can severely impact your home’s air quality. Telltale signs include dust accumulating more quickly than usual, persistent off-odors that seem to come from nowhere, and an unusual increase in humidity levels. 

Your ductwork may have a breach that allows pollutants and moisture to infiltrate your living spaces. Why wait for allergies and respiratory issues to become a regular nuisance?

Uneven Cooling

Do you have hot and cold spots throughout your Owasso home? It’s a clear indicator that your ductwork is failing to distribute air evenly. You can also run your hands near your vents to feel for a significant difference in airflow. 

It could stem from leaks, blockages, or even an inadequate design that doesn’t match your home’s layout anymore. 

Your Go-To Air Conditioning Specialists in Owasso, OK

Do you need to replace ductwork when replacing the AC? Instead of playing guessing games with your home’s comfort, leave it to Quality Heating, Cooling, Plumbing & Electric. We would love to assess, advise, and make necessary adjustments so you can make the most out of your new AC.  

Dial 918-393-4577 or read more of our blog to familiarize yourself with the signs an AC needs repair work—it might just save you from an expensive breakdown. 

Do Ductless Air Conditioners Need to Be Vented in Owasso, OK, Homes?

Do ductless air conditioners need to be vented? If you plan to get a ductless system, or you’re simply exploring your cooling options, this concern has likely crossed your mind.

As Owasso’s reliable AC repair crew, we at Quality Heating, Cooling, Plumbing & Electric know a lot about climate control systems and what they need to function optimally. Keep reading as we highlight the crucial details and help you make the most of your investment.

What Are Ductless Air Conditioners?

While centralized cooling requires a network of ducts to spread treated air across your home, ductless or mini-split systems operate on a room-by-room basis. They bring convenience and versatility by eliminating the need for complex ductwork.

You can install these compact units wherever you need them most, whether it’s your cozy home office or that newly renovated kitchen. It’s a sleek and efficient option for those hard-to-reach spaces or additions to your property.

How Mini Splits in Owasso, OK, Work

This HVAC system has two parts: an indoor and outdoor unit. The former contains a blower fan and an evaporator coil, while the latter houses the compressor and condenser coils.

When you turn it on, the indoor unit pulls in warm air from the room, cools it using refrigerant in the evaporator coil, and then circulates the chilled air back into the space. 

The outdoor unit works in tandem by expelling the absorbed heat outside using coils. Mini-split heat pumps work similarly but reverse the process to bring warmth during colder months. 

No Venting Necessary

Do ductless air conditioners need to be vented? The short answer is no. Traditional cooling systems compress the air indoors with an air handler, which requires a constant intake and outtake of air. 

Ductless ACs operate differently. Since the outdoor unit contains a compressor, it can easily acquire and expel air through its surroundings. You only need one tiny opening in the wall to connect the outdoor and indoor units.

Types of Ductless Mini Split in Owasso

Depending on your home’s specific needs, you can choose between these air conditioners:

Single-Zone Designs

Single-zone systems have one indoor unit connected to one outdoor compressor. It’s ideal for targeting a specific room in your property. 

If you have an open layout or a particular spot that just doesn’t seem to cool down no matter what, this option might have you covered. Always account for the square footage and the cooling capacity of the model so it perfectly matches your needs. 

Multi-Zone Designs

Multi-zone systems shine in Owasso properties with varied cooling requirements across different areas. Imagine having the ability to set your bedroom to a colder, sleep-friendly temperature while keeping the living area slightly warmer for those cozy movie nights. 

These systems handle multiple indoor units connected to one outdoor compressor for tailor-fit comfort in every room. They’re a game-changer for households seeking personalized climate control without compromising efficiency or aesthetics.

Doesn’t this sound like a centralized system? Yes, but instead of air ducts, multi-zone setups use small refrigerant lines that require significantly less space and structural alteration.

Why Many in Owasso, OK, Have Made the Switch

Aside from its duct-free design, a mini split AC brings other worthwhile perks that Owasso homeowners find irresistible:

  • Easy installation: Forget about tearing down walls for ductwork; a mini split requires a small hole. You get less downtime and less mess to deal with. 
  • Efficiency: Ductless systems target specific zones to reduce wasted energy (and monthly bills). You’re only cooling the rooms you use, not the entire house.
  • Improved air quality: With no ducts to gather and spread dust, you’re breathing cleaner air. It’s a win-win for allergy sufferers.
  • Design flexibility: You can find different indoor units to match your aesthetic preferences. Some attach to your interior wall or ceiling to maximize floor space, while others come as freestanding units that blend seamlessly. 
  • Smart features: Adjust settings from your bed or halfway across the world—modern convenience right at your fingertips.

Your Trusted Ductless Mini Split AC Specialists in Owasso, OK

Do ductless air conditioners need to be vented? If you have more questions or are ready to explore how these systems can cool or heat your space more efficiently, Quality Heating, Cooling, Plumbing & Electric is here to guide you every step of the way. Our specialists would love to share insights and help you find a setup that checks every box. 

Dial 918-393-4577 or read more of our blog to learn the culprits of an air conditioner freezing up and how to prevent them.  

Do Air Conditioners Lose Efficiency Over Time in Tulsa, OK?

With the costs of just about everything soaring these days, homeowners in Tulsa are looking for ways to keep their bills in check. That includes electric bills, but when the summer temperatures hover in the 80s and 90s, it can be hard to balance the desire to save money while also running the air conditioning all the time.

As their bills go up and it gets harder to keep their homes comfortable, many homeowners wonder, “Do air conditioners lose efficiency over time?” The short answer is yes.  Here, Quality Heating, Cooling, & Plumbing discusses why this happens and how professional AC repair in Tulsa, OK can help you stay cool and keep your budget intact. 

Why Air Conditioners Lose Efficiency 

Appliance technology is always improving, and a brand-new air conditioning system will undoubtedly be more efficient than one that’s a decade old. However, even if your air conditioner is only a few years old, it’s probably not as efficient as it was when it was brand-new.

The fact is all appliances lose efficiency over time for several reasons:

Wear and Tear 

An air conditioner in Tulsa must withstand a great deal of wear and tear. Most units run for the majority of the year, and at the height of summer, they run almost constantly. The efficiency of older air conditioners is more likely to suffer due to wear and tear since there’s a greater chance for the mechanical components to wear out and stop working as well as they should. 

Wear and tear also occurs because air conditioning units are outdoors. Constant exposure to the elements, including fluctuating temperatures, rain, occasional snow, and sunlight, can contribute to mechanical deterioration and reduce efficiency. 

Poor Maintenance 

Although even the most meticulously maintained air conditioners will eventually become less efficient, poor maintenance is a significant factor in the overall lifespan and cost of running the system. 

Clogged air filters, dirty condenser and evaporator coils, and loose electrical connections can all cause the air conditioning system to work harder, effectively reducing its efficiency.

Old Refrigerant 

If you’re struggling to keep your Tulsa home cool and asking the AC repair technician, “Do air conditioners lose efficiency over time?” they’ll tell you yes, especially if your unit still contains R22 refrigerant. 

Older air conditioners may still contain this outdated coolant, which the government phased out several years ago. Not only is the gas harmful to the environment, but it’s not nearly as efficient for cooling your home as the newer refrigerants used in air conditioners. 

Is It Time for an Air Conditioner System Replacement?

When your air conditioner steadily becomes more inefficient, struggling to keep your home cool while costing more every year, you might think it’s time for an HVAC system replacement. Proper maintenance can keep the system running smoothly for well over a decade, but there are some signs that it’s time for an upgrade:

  • Your HVAC system is over 15 years old 
  • Your utility bills keep increasing 
  • Your home never cools off, even though the air conditioner runs constantly
  • You notice hot and cold spots throughout your home
  • The thermostat readings are inaccurate 

Tips to Keep Your Tulsa Air Conditioner Working Efficiently

Now that you know the answer to “Do air conditioners lose efficiency over time?” how can you keep your unit in top condition for as long as possible? 

The most important thing to do is maintain the unit. Changing the air filter at the recommended intervals and scheduling professional maintenance at least once a year can go a long way toward preventing malfunctions and supporting efficiency. 

Reducing wear and tear on the unit can also preserve efficiency. Do this by:

  • Closing the curtains during the day to help keep rooms cool
  • Investing in a programmable thermostat
  • Keeping the area around the outdoor unit debris-free
  • Avoiding extra heat on hot days by using the oven, dryer, etc. 
  • Installing the thermostat away from direct sunlight, lamps, and heat-producing appliances 

Turn to Quality Heating, Cooling, & Plumbing for All Your Air Conditioning Needs in Tulsa, OK

Many customers ask us, “Do air conditioners lose efficiency over time?” and although the answer is “yes,” with help from Quality Heating, Cooling, & Plumbing, you can maintain maximum efficiency and save money.  Schedule an air conditioner inspection and maintenance visit in Tulsa today, and one of our professional technicians will evaluate your system. If you need a new system, we can help you choose the best one based on AC efficiency ratings and your needs. 

Make an appointment for AC service today by calling 918-262-5245 or using our online form. 

Why Is My AC Fan Spinning Backwards in My Tulsa Home: What to Know

When Tulsa’s temperatures start climbing toward 100 degrees, the last thing you need is an air conditioner malfunction. But if your system stops blowing cold air or doesn’t blow any air at all, you want to get to the bottom of the issue as quickly as possible. 

One common reason for a lack of cold air is a problem with the AC fan. While you might not immediately notice it, an AC fan spinning backwards is a sign that you need help from a professional technician. Quality Heating, Cooling, & Plumbing, the source for premier AC repair in Tulsa, OK, explains how to identify an AC fan spinning in the wrong direction, what it means, and what to do about it. 

How to Identify an AC Fan Spinning Backwards 

If you discover your AC not working, the first step is to run through a basic troubleshooting checklist. Making sure the vents are open, the thermostat setting is correct, and the air filter is clean can solve the problem without any fuss. However, if none of those quick fixes work, and the temperature in your Tulsa home is rising quickly, head outside to check the AC fan in the condenser unit.

On the unit’s blower motor, you’ll find a data tag that contains information about the AC motor that can help you spot an AC fan spinning backwards. The tag will have either the letters CW or CCW, which stand for clockwise or counterclockwise, and the correct direction for the fan to turn. 

From there, you can simply look at the fan to determine whether it’s going in the right direction. If it’s not and you see the AC blower running in reverse, there’s a problem that requires attention from an AC repair technician. 

The Most Common Problems with AC Fans in Tulsa, OK 

The most likely reason for reversed airflow in an AC unit is a problem within the motor. When the motor malfunctions, it can change the direction of the fan and prevent the air conditioner from cooling down your home. 

These problems may include the following:

Overworked Motor 

The fan motor has to withstand a great deal of wear and tear, especially on hot summer days in Tulsa when it runs almost constantly. This takes a toll on the mechanical components inside the motor, which can fail and cause it to malfunction. Parts like switches, rotors, and windings can break down and cause the fan to spin in the wrong direction, but replacing them — or the entire motor — can solve the problem.

Faulty Capacitor 

Another fan component that’s prone to failure is the capacitor, which provides the motor with electrical power. If the capacitor isn’t working, the fan won’t get the boost of power it needs to start up and run, and the fan can spin backwards. 

Wiring Issues

If you notice reversed airflow in an AC unit soon after installation or repair, the problem could be due to incorrect wiring. Mixing up or reversing wires during setup could result in the fan spinning in the wrong direction. 

Failing Belts 

Keeping up with cooling demands in the Tulsa heat also puts a great deal of strain on HVAC belts. Eventually, they can break down or fail, resulting in air conditioning problems. 

Solving Air Conditioner Fan Problems 

If you notice your AC fan spinning backwards and don’t have adequate cold air coming from the vents, you need help from a professional AC repair technician. Because the problem can stem from several potential issues, it’s best to rely on someone with the technician’s knowledge to identify the cause and make the necessary repairs. 

Taking good care of your air conditioning equipment can prevent most of the problems that result in a fan malfunction. For example, changing the air filter on the recommended schedule can help keep the unit from working too hard and putting excess strain on the mechanical parts. Scheduling annual maintenance service also helps prevent issues, as the technician will inspect the unit for signs of trouble and make preventative repairs to ensure problem-free operation. 

Call Quality Heating, Cooling, & Plumbing for Fast AC Repair in Tulsa, OK

When you see the AC fan spinning backwards and the temperature is rising, you don’t have time to wait for help. If you call Quality Heating, Cooling, & Plumbing, you won’t have to wait long, as one of our professional technicians will be there quickly to diagnose the issue and make sure the AC fan keeps running

Schedule service in Tulsa and the surrounding area by calling (918) 262-5245 or using the online form. 

Does a Furnace Need Water to Run?

Many home heating systems, such as boilers and radiators, use water to heat homes. But what about furnaces? Does a furnace need water to run?

The answer is no; furnaces do not need water to run. However, furnaces can still produce water through combustion condensation. The team at Quality Heating, Cooling & Plumbing is here to discuss furnaces, water, and the relationship between the two. 

Contact us today to schedule services for heating and air conditioning in Tulsa!

Do Furnaces Use Water?

Does a furnace need water to run? No. HVAC furnaces do not use water to generate heat. Instead, furnaces heat by burning natural gas. The combustion reaction oxides the natural gas, and the reaction releases heat — no water needed!

On the other hand, boilers and radiators do create heat using water. Boilers heat water and pump them through your home into radiators. The hot water radiates heat, increasing the temperature of your home. 

Furnaces don’t have boilers or radiators, so you never have to worry about your furnace running out of water or not having enough water. 

Why Does My Furnace Have Water On It?

Furnaces don’t need water to run, but homeowners may notice condensation and moisture around their furnaces over time. If furnaces don’t require water, then where does this water come from?

The answer is combustion. An energy-efficient heating appliance uses a combustion reaction to produce heat, carbon dioxide, and water vapor. The heated vapor condenses when it hits the heat exchange, creating drops of moisture. One main function of furnace vents is to get rid of this moisture. 

Clogs in your furnace drain system can cause condensation to leak out of vents and collect on the floor. If you notice water pooling on the floor near your furnace, you should check vents and drain lines to see if there are any leaks or blockages. 

Below is a quick list of other reasons your furnace might be leaking water. 

Air Conditioning Problems

If your furnace is dripping water, your air conditioning system may be the culprit. In modern HVAC systems, furnaces and air conditioners often share the same cabinet and blower fan. Leaks from your air conditioner can work their way into your furnace, making it appear like it’s your furnace that is leaking. 

Broken Condensate Pump

Most furnaces have a special pump that helps drain any condensate it produces. If the condensate pump brakes, water won’t drain properly and may start to leak onto the floor around the furnace cabinet.

Frozen Coils

Modern air conditioners use evaporator and condenser coils to produce cold air. If these coils freeze, they can leak water into your heat exchanger and appear to leak from your furnace. That is why we always recommend getting separate inspections for both your air conditioner and furnace. 

Are Boilers or Furnaces Better?

Whether boilers or furnaces are better depends on your specific situation and preference.

Boilers are highly efficient and relatively low maintenance compared to gas furnaces. They also produce fewer emissions and dust than furnaces. 

The downsides of boilers are they take longer to heat your home, and installation can be expensive. Boilers may also have difficulties running in cold weather because the water can freeze, and they can spring a leak. 

Furnaces are comparatively stronger and heat faster, but they cost more to run. Furnaces can also leak gas, which can pose a health and safety hazard, and also have shorter lifespans than boilers. 

Other Heating Systems That Use Water

Boilers are the most common type of heating system that uses water, but others exist. Below are two other relatively common HVAC setups that run on water. 

Baseboard Heating Systems

Baseboard heating systems are similar to traditional boiler systems in that they use pipes to pump hot water and steam through your home to distribute heat. The main difference is that baseboard systems don’t have individual radiators but instead use special electric baseboards near the floor. 

The steam running through the baseboard radiators heats the air, which then rises to fill the rest of the room. The main downside of this kind of system is that installing the electric baseboards can be difficult. 

Radiant Floor Heating Systems

Radiant floor heating systems work like baseboard systems, except they pipe heat through piping underneath the flooring. Homeowners favor this kind of system because it keeps your feet warm in addition to being efficient and low maintenance. 

Water Heater vs. Furnaces

Many homes also have a water heater that produces the hot water they use throughout the home. When water heaters leak, homeowners may initially want to call their HVAC company due to the word “heater” in the name.

However, water heaters are not part of your HVAC system but your plumbing system. Water heater repair requires a plumber, not an HVAC technician. An HVAC technician won’t be able to fix your water heater, just like how a plumber won’t be able to fix your furnace. 

Is Water on Your Furnace a Problem?

Even if the amount of water is small, it can still be a problem. Water and moisture can damage electrical components, and mold and mildew can start to grow in your duct system. Electrical damage can cause short circuits, which may lead to a fire. 

Water leaks from your HVAC system can also damage your home. Water in a crawl space can damage wooden structures, and standing water in your basement can seep into your home’s foundation. Suffice it to say that if you see water pooling around your furnace, you should call an HVAC expert ASAP. 

What Should I Do If I Detect Water on My Furnace?

If you do notice water on and around your furnace, the first thing you should do is turn it off. Running a furnace that is wet increases the chance of damage and is an electrical hazard. Next, clean up any standing water and wipe condensation off the unit. Make sure you take off the front panel and remove any water from the inside, too. 

Once you clean up visible water, contact an HVAC professional to schedule an appointment. They can identify the location of the leak and fix it in no time. 

How to Keep Your Furnace Dry

Water can damage your furnace and necessitate expensive repairs. You can keep your furnace safe from water with the following tips:

  • We recommend scheduling regular furnace maintenance at least once every year — preferably every six months. Maintenance can catch and fix leaks and blockages before they form. 
  • Get in the habit of checking your HVAC drain lines and vents for blockages. You can flush your drain lines using vinegar or bleach (do not mix the two together as that can create harmful chlorine gas).
  • Make sure you change furnace filters once every three months. Clogged filters can collect moisture, which can facilitate mold and algae growth. 
  • Periodically wipe down the internal components of your furnace. Dust and dirt can trap moisture. 
  • Consider getting a dehumidifier to remove moisture from the air around the furnace. Removing moisture in the air reduces condensation. 

Quality Is in Our Name!

To recap, does a furnace need water to run? The answer is no. However, large amounts of water around your furnace can indicate a problem with the drains or vents. Contact an expert such as Quality Heating, Cooling & Plumbing today to troubleshoot any furnace issues. Read our blog to learn more about the difference between a gas furnace vs. electric furnace. If you would like to schedule an appointment, contact us online or call today at (918) 276-7151!

How To Relight a Pilot Light on a Furnace

If you’re experiencing problems with the heating system in your Tulsa home, rely on the experts at Quality Heating, Cooling & Plumbing for help. Book an appointment now!

If your home uses a gas furnace to provide heat to the premises, it may have a pilot light. The pilot light or flame ignites the heating unit’s burners to combust natural fuel to produce heat.

Unfortunately, these flames can blow out for various reasons. So, knowing how to relight a pilot light on a furnace is necessary to keep the warmth flowing. 

As one of the top service providers for heating and air conditioning in Tulsa, Oklahoma, Quality Heating, Cooling & Plumbing regularly tends to gas furnaces. If you can’t properly heat your home due to the furnace’s pilot light going out, here are several tips on relighting it and possible blow-out causes.

Reasons a Furnace Pilot Light Goes Out

Age of the Heating Unit

Many furnaces facilitate the combustion process with a pilot light. When you turn on your home’s heat, the gas will travel through a valve to reach the pilot light. It’s a small blue flame that the system uses to ignite natural gas from the main burner.

Newer natural gas and propane furnaces lack a typical pilot light that burns constantly. Instead, they use an electronic ignition system that turns on only when necessary to burn fuel. Older furnaces 20 years old or older have traditional standing pilot lights. 

With a furnace that old, the system is likely to have worn, dirty components, reducing their inefficiency. As a result, the pilot light could struggle to stay lit. 

Ventilation Problems

A gust of air could also blow out the furnace’s pilot just like a lit match or candle. You might not realize that air could cause your pilot light to go out. Still, it’s common, especially if your heating unit ducts leak air. 

Gusts of wind are most likely the cause of your pilot light issues if your furnace flue has an incorrect installation or significant damage. Flue problems can also develop and affect your pilot light’s efficiency if the exhaust isn’t the right size for the furnace. In that case, the incorrectly sized flue could let in a draft that prevents the pilot light from staying lit. 

Thermocouple Issues

A thermocouple is a small safety valve that stops the flow of gas to the pilot light. Stopping the gas flow to the pilot light is necessary if the flame is no longer lit or is too small to ignite the gas in the main burner. 

The purpose of a thermocouple, which is directly over the pilot light, is to detect the flame. If the component is dirty or damaged and the flame goes out, the gas supplying the pilot light will continue seeping out. A gas leak is a serious problem, so a functional thermocouple is essential for your household’s safety. 

However, if the thermocouple has a problem, it could incorrectly shut off the gas supply to the pilot light. Without gas, the flame will not stay on. It’s not enough to know how to relight a pilot light on a furnace with a broken thermocouple; you’ll need a furnace technician to clean, repair, or replace the component to ensure it doesn’t prematurely cut the gas supply to the pilot light. 

Problems With the Gas Valve or Fuel Supply

Similar to a thermocouple, a functional gas valve is necessary for a pilot light on a furnace to stay on. If the gas valve doesn’t feed enough gas to the pilot light because of damage, it will blow out due to the lack of fuel. Even if the valve is operational, the pilot light will continue experiencing complications if the fuel supply is low. 

Broken Heat Exchanger

A furnace heat exchanger is a crucial component between the blower and combustion chamber that transfers heat from the furnace to the rest of your home. If your unit’s heat exchanger cracks, it will negatively affect the combustion chamber’s air pressure. As a result of the air pressure and venting changes, air can seep inside the chamber and blow out the pilot light. 

It’s best to hire a professional HVAC company to address an unlit pilot light if you suspect problems with the heat exchanger. 

5 Simple Steps To Relight the Pilot Light on a Furnace

While many homeowners feel comfortable enough to relight their furnace pilot lights if they go out, professional HVAC help is often necessary to address equipment issues that are causing the pilot light problems. Still, you can learn the basics of how to relight a pilot light on a furnace with this step-by-step guide.  

1. Check the Equipment’s Instruction Manual

Before doing anything to your furnace, you should familiarize yourself with its instruction manual. In the manual, you’ll find relevant information about your specific heating system, such as how to relight the pilot light and where to find “on,” “off,” and “reset” switches. 

Though different heating system models and brands may have varying setups and processes for relighting pilot lights, the general instructions tend to be the same. If you can’t find your furnace’s instruction manual, you can use the following steps to turn it back on. 

2. Locate the Furnace’s Reset Switch and Pilot Light Assembly

The pilot light assembly will most likely be at the bottom of the equipment. Near it, you may find a knob or switches with an “on,” “off,” and “pilot” setting. 

The knob should be fixed on the “pilot” setting once you locate it. Turn it to the “off” setting using your fingers. This adjustment stops the gas flow to the pilot light, making it safe to relight. 

3. Wait Several Minutes

You don’t want to immediately shift the knob from the “off” to the “pilot” positions to relight the pilot light. Instead, wait for at least five minutes. You must give the remaining gas time to dissipate from the combustion chamber to prevent igniting it. 

4. Relight the Pilot Light

After waiting for several moments, turn the knob or switch back to the “pilot” setting. Doing this will open the gas valve to the pilot light. 

Locate the furnace’s reset button. Next, light a long match or use a long-neck lighter to relight the pilot light while pressing the reset button. Keep your finger on the reset button until you see the pilot light burning steadily with a bright blue flame. 

5. Observe the Furnace’s Functions for Other Problems

Even after following these steps, the pilot light could go out again if there’s an unfixed problem blowing out the flame or preventing sufficient gas supply from reaching the pilot light assembly. If the flame blows out again, it’s time to call the professionals. 

Get Professional Help With Your Natural Gas Furnace Today

The pilot light on your gas furnace can blow out at any time, leaving your home in Tulsa, Oklahoma, without sufficient heat. It’s usually best to seek help from a qualified HVAC company, but knowing how to relight a pilot light on a furnace is still helpful in minor situations. 

At Quality Heating, Cooling & Plumbing, our crew of licensed and certified technicians can help with many systems and equipment around your home to improve your safety and comfort. Whether you need to reset your electronic ignition furnace, repair a water heater, or maintain your furnace to optimize its performance and improve indoor air quality, our team can help. 

As a locally owned and operated company, Quality Heating, Cooling & Plumbing’s team is responsive, experienced, and courteous. Call (918) 393-4577 for an appointment today. 

What Causes a Furnace Pressure Switch To Fail?

As you watch the temperatures plummet, you change your thermostat settings to heat. Your furnace works without a hitch for a while, producing cozy, warm air that heats your house despite the frigid weather outside. However, you inevitably stumble upon a frustrating obstacle that causes your furnace to stop working. At Quality Heating, Cooling & Plumbing, our HVAC contractors in Tulsa, Oklahoma, typically discover that a pressure switch failure triggers these sudden halts. What causes a furnace pressure switch to fail? Let’s dive into some answers below.

HVAC contractors in Tulsa

What Exactly Is a Pressure Switch?

Pressure switches are safety features that prevent carbon monoxide exposure and explosions in households that use furnaces for heating. When negative motor pressure triggers their response, they automatically stop combustion. Your furnace needs combustion to produce the heat that warms your home.

The furnace completely shuts down when the switch interrupts the combustion process. While this feature ultimately protects your household from potential disasters, it also inconveniences you when the trigger doesn’t have potentially disastrous consequences. 

What Causes a Furnace Pressure Switch To Fail?

Furnace pressure switches can fail for myriad reasons beyond dangerous occurrences. Sometimes, a failure happens because of something innocuous. Regardless, only a qualified HVAC technician should diagnose the issue and verify whether any authentic threats exist. 

Learn more about some common causes of pressure switch failure below. Your HVAC technician might discover one of these reasons if your pressure switch fails. 

Diaphragm Flap Damage

The pressure switch houses a component called a diaphragm flap. This flap stays open when the furnace powers off. Once the unit powers back on, the flap closes to create a complete electrical circuit that allows electricity to power the furnace’s operations. 

Sometimes, this flap incurs damage or becomes stuck. Diaphragm flap damage prevents electricity from moving through its full, conductive path. Therefore, your pressure switch will fail, preventing your furnace from turning back on.  

Flue Obstructions

The flue pipe is a pathway that allows your furnace’s waste gasses to escape your system and home. These gasses can have toxic effects on household occupants if they maneuver back into the system through a process called back drafting. Therefore, the pressure switch will fail if it detects these gasses returning due to a lack of exit points. 

Flue obstructions are the most common cause of returning waste gas. Small animal carcasses, bird nests, and plant matter can sometimes become lodged into the flue pipe. An HVAC technician can remove these obstructions, allowing waste substances to escape again. 

Debris Buildup

The pressure switch is near the gas valve and ignition area on most energy-efficient residential furnaces. This location allows the switch to take fairly accurate readings of the gas and ignition environment. However, the switch can also gather dust and dirt buildup over time. 

The ignition area and gas valve create soot, which travels to nearby components. This soot can clog the limit switch, pressure switch, flame sensor, and pilot light. If any of these components becomes coated with too much debris, the furnace may struggle to operate.  

Old Age

What causes a furnace pressure switch to fail when all else seems fine? Like other parts, pressure switches eventually succumb to old age and wear. Fortunately, pressure switch replacement services don’t typically break the bank. 

A licensed HVAC technician can quickly and efficiently perform this service. If you lose heat due to a faulty, old pressure switch, they’ll help you enjoy a cozy indoor environment again in no time. 

Malfunctioning Pressure Switch Hoses

Many pressure switches have one or two hoses connected to them. These hoses attach the switch to the condensate collector box and the draft inducer. Sometimes, the hoses become obstructed with debris. 

The hose that connects to the condensate collector box may become flooded with condensation. Meanwhile, the one attached to the draft inducer might collect too much dust and other dry debris. An HVAC technician will detach the hoses and remove any detritus hidden within their length. Otherwise, they may replace them. 

Electrical Disconnections

If you recently experienced a power surge or other electrical phenomena in your area, you can likely blame pressure switch failures on these occurrences. Surges overwhelm the pressure switch alongside other components. Your technician will probably replace the switch under these circumstances. 

Disconnected wires may also trigger failures. Like other furnace networks, the pressure switch relies on electrical circuits to send messages and respond to its environment. Loose connections are common culprits of switch failures. 

Preventing Pressure Switch Failures

What can you do to avoid pressure switch failures? Choosing reputable HVAC services throughout the lifespan of your furnace will significantly decrease the odds of misreadings and triggers causing failures. Implement the tips outlined below to protect your pressure switch and furnace. 

Choose Reputable Installation Services

Furnace installation is the foundation for a successful service life. Subpar installation services from unqualified contractors will result in various shortcomings and disappointments. A poorly installed furnace is more likely to develop triggers that cause pressure switch failures and other impromptu annoyances at the worst possible times. 

Regular Professional Maintenance

Scheduling annual maintenance appointments with a professional HVAC company will mitigate most of the above-listed issues. A technician will examine and troubleshoot your furnace for issues like dirty components, flue obstructions, and damaged parts. If they discover these problems, they’ll address them during the service. 

Maintenance services are the best way to keep components clean and intact. Not only do they prevent inconvenient failures, but they also prolong your furnace’s service life. You’ll enjoy reliable, complication-free heating when you schedule your yearly appointment in the autumn. 

Choose Furnace Repair and Maintenance Services From Quality Heating, Cooling & Plumbing

What causes a furnace pressure switch to fail without warning? Damaged or dirty components, regular wear and tear, and electrical disconnections are some of the most common switch triggers. Quality Heating, Cooling & Plumbing also answers other pertinent HVAC questions, including, “Is it bad to turn your furnace on and off?

Accompany the answers to your burning heating and cooling inquiries with reputable HVAC services in Tulsa, Oklahoma, and surrounding areas. Call (918) 393-4577 to schedule services.

Can a Cracked Furnace Be Repaired?

Do you have a faulty furnace that struggles to heat your home? Cracks in the furnace’s heat exchanger are a major cause for concern since this component helps supply your home with reliable and safe heat. This begs the question: Can a cracked furnace be repaired? 

The experts at Quality Heating, Cooling & Plumbing, the best heating and cooling company in Tulsa, are here to explain everything you need to know about this issue. Learn what causes cracks in the heat exchanger and how HVAC technicians resolve the problem in this helpful guide. 

can a cracked furnace be repaired

What Is a Furnace Heat Exchanger?

Before we answer the question “Can a cracked furnace be repaired?” let’s go over the heat exchanger’s purpose. This essential piece of your heating system aptly helps transfer the heat from the combustion chamber toward the motor fan so the hot air will circulate through your vents. 

The heat exchanger acts as a shield against the combustion chamber. All of the gases burning inside the chamber produce harmful flue gases along with the heat. The purpose of the heat exchanger is to absorb the heat and filter out the flue gases so your vents fill with warm air instead of dangerous chemicals. 

Heat exchangers should operate normally if you have a new furnace and follow proper maintenance protocols. Excess heater stress cracks the shield, especially if the furnace is older and has a good amount of wear and tear. Corrosion and frequent heat cycling can add to the system’s stress and damage this critical piece. 

Dangers of a Cracked Heat Exchanger

A heat exchanger is a huge part of furnace safety. It prevents dangerous gases from entering your home’s vents by keeping them inside the combustion chamber. Any cracks or damage to the heat exchanger can have major consequences, including the following issues. 

Greater Carbon Monoxide Risk

The slightest hole in a furnace heat exchanger can send carbon monoxide and other toxic gases throughout your home. This is extremely dangerous for your health and may cause you to feel nauseous or disoriented. Since carbon monoxide is odorless and colorless, you likely won’t know you’re breathing it in unless you have a working detector or start to feel ill. 

Can a cracked furnace be repaired so you no longer have to live with this risk? Yes, repairs are possible and must happen immediately for your safety. 

Decreased Furnace Efficiency

When heat escapes through holes in the exchanger, your furnace must work harder to reach your desired temperature. The efficiency of the system will suffer, and you’ll have higher energy bills despite your furnace failing to heat your home. Modern heating systems with an Annual Fuel Utilization Efficiency rating of 90% to 98.5% contain two heat exchangers to seal the combustion process and save you money. 

How Can a Cracked Furnace Be Repaired?

HVAC technicians usually recommend two courses of action for fixing cracked heat exchangers: replace the heat exchanger or the whole furnace. Experts will come to your home and perform an inspection to determine which route is best for you. 

If you’ve had your unit for more than ten years and are nearing the end of the average furnace lifespan, it’s in your best interest to replace the entire system. The heater will likely experience further problems down the road and be less efficient than it once was. You can save money on repair costs and your monthly energy bills by installing a brand-new heater. 

Furnaces under ten years old will benefit from a heat exchanger replacement. The rest of the system should work fine for several more years as long as you perform regular maintenance. 

When To Call a Professional Technician

When should you call a heating repair company to inspect your furnace? Contact a specialist if your carbon monoxide detector goes off or you start feeling sick because of flue gases. This issue often stems from damage to the heat exchanger. 

Other warning signs to look out for include:

  • Foul odors from the furnace
  • A yellow furnace flame
  • A build-up of dust or debris near your vents
  • Large amounts of soot inside the furnace
  • An unexplained increase in energy bills

A contractor will assess the condition of your furnace and determine whether the heat exchanger is to blame. During their inspection, they may notice additional issues with the HVAC system, such as leaky ducts or a clogged air filter. Technicians will address any issues that arise so you can safely heat your home. 

How To Prevent Damage to Your Heat Exchanger

Not only can a cracked furnace be repaired, but you can also prevent it from happening in the first place. Experts suggest the following measures for optimal heating performance. 

Book Professional Installation

If you install a furnace without the proper qualifications, you face the risk of mechanical issues, including a cracked heat exchanger. Licensed HVAC contractors know how to install gas furnaces correctly, so they work without issue. 

Schedule Regular Maintenance

Furnace tune-ups prevent the need for part replacements and repairs. This saves you money in the long run and keeps your furnace running efficiently for lower utility costs. Have a professional heating technician inspect your furnace once a year, ideally during the fall, to keep your system in excellent condition. 

Regular maintenance involves cleaning internal components, checking for damaged parts, and tightening loose connections. You’ll have peace of mind when you have a trusted expert perform routine maintenance. 

Schedule a Professional HVAC Inspection With Quality Heating, Cooling & Plumbing

After reading this guide, you no longer have to wonder, “Can a cracked furnace be repaired?” If you experience the signs of a cracked heat exchanger or have other problems with your furnace, contact the specialists at Quality Heating, Cooling & Plumbing. We can answer all your burning questions, such as “How long do gas furnaces last?” and restore your faulty furnace components. 

Call (918) 262-5245 or use our online contact form to request immediate service in Tulsa and the surrounding areas.